JOHNSON EVINRUDE 40 48 50 HP SPARK LEVER ARM CAM ROLLER 432572 1989 THRU 2003

Description

THIS IS BETTER THAN THE OEM REPLACEMENT PART.PLEASE LOOK AT THE COMPARSION BETWEEN THE OEM ONE NEXT TO THE WHITE ROLLER IN THE PICTURE. YOU ARE ONLY PURCHASING THE WHITE ROLLER NOT THE TWO OF THEM. REPLACE YOUR OLD ROLLER PUT A LITTLE MARINE GREASE ON THE NEW BUSHING AND REUSE THE ONE WASHER (NOT TWO  OF THEM )JUST ONE WASHER AND THEN  INSTALL THE RETAINER ON THE SHAFT . IF THERE IS A LOT OF SPACE WITH ONE WASHER PLEASE USE A ADDITIONAL ONE TO PREVENT THE PLAY. I HAD TO DO THAT ON SOME OF THEM.PLEASE LOOK AT THE LAST PICTURE WHAT IT LOOKS LIKE AFTER REPLACING IT.THE LEVER IS NOT INCLUDE. THIS STYLE IS TO PREVENT THE IGNITION TIMING FROM ADVANCING 3 TO 4 DEGREE'S TO PREVENT FROM BURNING PISTONS DUE TO THE BAD FUEL.THE LAST PICTURE IS TO SHOW YOU WHAT IT LOOKS LIKE AFTER THE INSTALLATION OF THE ROLLER ON YOUR LEVER. THIS ARM IS NOT INCLUDED IN THE PRICE OF THIS REVISED KIT. APPLICATION 1989 THRU 2003 YEARS 40 48 50 HP MOTORS. I HAVE BEEN REPLACING THE OEM ROLLERS FOR MANY YEARS AND FINALLY HAD THIS MFG. FOR MY CUSTOMERS AND HAVE BEEN USING THIS STYLE FOR OVER 1 YEAR NOW.THIS IS A  FAR BETTER PART THAN THE FACTORY REPLACEMENT OEM PART THAT YOU HAVE TO CHANGE MANY TIMES. YOU WILL NEVER HAVE TO REPLACE IT DUE TO THE OEM PART WHICH THE SLEEVE ALWAYS BREAKS. WHEN REPLACING AGAIN  YOU ONLY USE ONE WASHER ON THE SHAFT WHICH THE ROLLER GOES ON WHAT YOU SEE IN THE PICTURE.IN SOME RARE CASES I DID HAVE TO USE TWO WASHERS REASON TOO MUCH SIDE PLAY. PLEASE MAKE SURE THIS IS THE CORRECT PART FOR YOUR APPLICATION. SOLD A IS. ABSOLUTELY NO RETURNS FOR A REFUND .SORRY THIS IS NOT AMAZON OR WALMART PURCHASE SHIP OPEN TOUCH AND RETURN ON MY $$$.  IF YOU DO NEED TO RETURN THE ITEM YOU WILL HAVE TO PAY FOR THE RETURN SHIPPING AND ONCE I RECEIVE IT BACK AND INSPECT IT YOU WILL BE CHARGED  A 25 % RESTOCKING FEE. I WILL SHIP USPS FIRST CLASS MAIL ONLY IN THE LOWER 48 STATES OF THE GOOD OLE USA # 1 IN THE WORLD. MAY GOD BLESS THE GOOD OLE USA.